horizontal arm cmm

Horizontal ARM CMM

SWAN L Series - Table mount High precision CMM

The Swan L series is attached to the main console structure. The main guide of the Swan is connected to the side of a strong cast iron work surface that is integrated in the machine.

Console systems integrated with work surface are very modular and simple. The use of traditional measurement gauges is speed and intuitive. The system brings flexibility and programmability of CMMs.

The light and sturdy movable carriage is completely built of light aluminum alloy and the double mechanical guideway with air bearings on the X axis. This feature guarantees quick measurement operations, reliability and high precision. The entire console structure integrated with strong work surface usually avoids the need of expensive foundation construction.

Why Choose a Horizontal Arm CMM ?
Horizontal Arm CMMs are the ideal solution to measure thin-walled components such as automotive car bodies, sheet-metal panels, vehicle doors, glass and dashboards together with the inspection of mechanical parts such as engine blocks and transmission castings, aeronautical and automotive components. COORD3 Horizontal Arm systems are modular in design and available both in single and dual arm versions and can be supplied in rail or table mount configurations. Machines can be supplied shop-hardened for applications requiring installation outside of the metrology room. The table support system is designed to minimize foundation requirements.

SWAN Horizontal Arm Table mount CMMs are available
with the following measuring strokes:

X axis strokes: 2000 | 3000 | 4000 | 5000 | 6000

Y axis strokes*: 1200 | 1500

Z axis strokes: 1500 | 1800 | 2000

*Per arm measuring stroke. Dual machine arms overlap by 100mm  per arm

MPEP  from 12 microns

MPEE  from 12 + 15L/1000 ≤ 40

Enviroment
  • Nominal Temperature 20 °C
  • Allowable Temperature Range: 18 – 22 °C
  • Temperature Gradient: 0.5° C/hour – 2° C/day – 0.5° C/meter
  • Extended Temperature Range: 16 – 26 °C
  • Operating Temperature Range: 15 – 35 °C
  • Relative Humidity 40 – 80% (non condensating)
  • Acceptable Vibrations: 30mm/ sec2 1-10Hz | 15mm/ sec2 10-20Hz | 50mm/ sec2 20-100Hz
Services
  • Air Consumption 110Nl/min
  • Power Supply Voltage 230v 50Hz or 110v 60Hz (+/- 2% single phase)
  • Maximum Power Consumption 10A 1400W
  • Minimum Air Supply 5.5 Bar -80PSI
Performance Data

All COORD3 CMM products are evaluated for accuracy using the ISO10360 standard

  • Laser Scanning Sensor
  • Disegageable drives on DCC models allowing manual operation
  • Dynamic Wireless Thermal Compensation of Machine and Part
  • Protection Bellows Covers to Y & Z axes
  • Renishaw PHS infinite position probe head
  • Cast Iron or Granite Table
  • Table with threaded holes or T slots
  • Air Drier
  • Modular Part Fixturing Kits
  • CMM Touch Station
  • CMM Modular Enclosure
The Swan L series of table mounted (Console) horizontal arm coordinate measuring machine offers a technically advanced and cost-effective solution for the dimensional inspection of thin-walled sheet metal and plastic components typical of the automotive industry.

The SWAN is unique in offering air bearings to both Y and Z axis providing a high-performance high accuracy solution.  The X-axis guide-way is located on the side of the machine cast iron or granite support table and allows the arm to be moved outside of its measuring volume for part loading. SWAN SI can be installed on pneumatic vibration isolation system for installation in production applications without the need for a dedicated machine foundation.

Modular in design SWAN L is available in a range of standard cross section sizes (ZY):

15.12 | 18.12 | 20.12 | 15.15 | 18.15 | 20.15 | 20.16 | 25.16 | 30.16

Accuracy from 12 + 15L/1000 <40

  • Table based models in single or twin arm configuration
  • Manual and DCC models with optional disengageable drives available
  • Granite or cast iron surface plate
  • Steel X guideway
  • Rugged machine construction for reliable operation in manufacturing environments
  • 0.1 micron resolution measuring scales incorporating dynamic signal processing
  • Highest accuracy in the industry
  • Precision roller bearings on X axis
  • Rigid air bearings to Y and Z axes with wide bearing spread ratios and low air consumption
  • Open access to CMM measuring area from all sides
  • Suitable for a shop floor environment
  • Maximum Positioning Speed 520mm/sec
  • Maximum Acceleration 850mm/sec20mm/sec2
horizontal-arm-cmm-machine rail mounted runway

Horizontal ARM CMM

SWAN SI Series - Rail mount CMM

The SWAN SI series of rail mounted (Runway) horizontal arm coordinate measuring machine offers a technically advanced and cost-effective solution for the dimensional inspection of thin-walled sheet metal and plastic components typical of the automotive industry.

The rail allows the machine to be installed flush with the factory floor with walkable way covers allowing inspection of large heavy parts either supported on a separate table, floor mounted fixture of automation system.

The SWAN SI series of rail mounted (Runway) Horizontal Arm CMMs allows the machine to be installed flush with the factory floor. Its walkable way covers enable inspection of large, heavy parts supported either on a separate table, a floor mounted fixture or an automation system.

The SWAN is unique in offering air bearings to both Y and Z axis providing a high-performance high accuracy solution.

Modular in design SWAN SI is available in a range of standard cross-section sizes (ZY):

15.12 | 18.12 | 20.12 | 15.15 | 18.15 | 20.15 | 20.16 | 25.16 | 30.16

Accuracy from 12 + 15L/1000 <40

  • Rail based models in single or twin arm configuration
  • Manual and DCC models with optional disengageable drives available
  • Optional granite or cast iron independent surface plate
  • Steel X guide-way rail
  • Rugged machine construction for reliable operation in manufacturing environments
  • 0.1 micron resolution measuring scales incorporating dynamic signal processing
  • Highest accuracy in industry
  • Precision mechanical bearings on X axis
  • Rigid air bearings to Y and Z axes with wide bearing spread ratios and low air consumption
  • Walk-on X axis covers for optimal safety
  • Machine can be flush floor mounted
  • Open access to CMM measuring area from all sides
  • Suitable for a shop floor environment
  • Maximum Positioning Speed 520mm/sec
  • Maximum Acceleration 850mm/sec2

COORD3 SWAN Horizontal Arm Rail mount CMMs are available
with the following measuring strokes:

X-axis strokes: 2000 | 3000 | 4000 | 5000 | 6000

Y-axis strokes*: 1200 | 1500

Z-axis strokes: 1500 | 1800 | 2000

*Per arm measuring stroke. Dual machine arms overlap by 100mm per arm

MPEP  from 12 microns

MPEE  from 12 + 15L/1000 ≤ 40

Enviroment
  • Nominal Temperature 20 °C
  • Allowable Temperature Range: 18 – 22 °C (Extended 16 – 26 °C)
  • Temperature Gradient: 0.5° C/hour – 2° C/day – 0.5° C/meter (Extended Range 5° C/day – 1.0° C/meter)
  • Operating Temperature Range: 15 – 35 °C
  • Relative Humidity 40 – 80% (non condensing)
  • Acceptable Vibrations: 30mm/ sec2 1-10Hz | 15mm/ sec2 10-20Hz | 50mm/ sec2 20-100Hz
Services
  • Air Consumption 110Nl/min
  • Power Supply Voltage 230v 50Hz or 110v 60Hz (+/- 2% single phase)
  • Maximum Power Consumption 10A 1400W
  • Minimum Air Supply 5.5 Bar -80PSI
Performance Data

All COORD3 CMM products are evaluated for accuracy using the ISO10360 standard.

  • Laser Scanning Sensor
  • Disegageable drives on DCC models allowing manual operation
  • Dynamic Wireless Thermal Compensation of Machine and Part
  • Protection Bellows Covers to Y & Z axes
  • Renishaw PHS infinite position probe head
  • Separate Cast Iron or Granite Table
  • Air Drier
  • Modular Part Fixturing Kits
  • CMM Touch Station
  • CMM Modular Enclosure
horizontal duel arm cmm

Horizontal Duel ARM CMM

SWAN SI Series - Rail mount Horizontal Arm CMM

The COORD3 SWAN DUAL ARM series of table (Console) and rail mounted (Runway) horizontal arm coordinate measuring machines offer a technically advanced and cost-effective solution for automotive car body-in-white and sub-assemblies.

The rail model allows the full machine to be installed flush with the factory floor with walkable way covers.

The SWAN is unique in offering air bearings to both Y and Z axis providing a high-performance high accuracy solution. Each horizontal arm measuring volume overlaps by 100mm allowing for full cross-body measurements.

Modular in design SWAN Dual Arm CMMs are available in a range of standard cross-section sizes (ZY):

20.30 | 25.30 | 30.30 | 25.34 | 30.34

Accuracy from 12 + 15L/1000 <40

  • Twin arm able or rail model configuration
  • Manual and DCC models with optional disengageable drives available
  • Granite or cast iron surface plate
  • Steel X guideway
  • Rugged machine construction for reliable operation in manufacturing environments
  • 0.1 micron resolution measuring scales incorporating dynamic signal processing
  • Highest accuracy in industry
  • Precision mechanical bearings on X axis
  • Rigid air bearings to Y and Z axes with wide bearing spread ratios and low air consumption
  • Walk-on X axis covers for optimal safety
  • Open access to CMM measuring area from all sides
  • Suitable for a shop floor environment
  • Maximum Positioning Speed 520mm/sec
  • Maximum Acceleration 1500mm/sec2

COORD3 SWAN Dual Horizontal Arm CMMs are available
with the following measuring strokes:

X-axis strokes: 4000 | 5000 | 6000 | 8000 | 10000

Y-axis strokes*: 1500 | 1600

Z-axis strokes: 2500 | 3000

*Per arm measuring stroke. Dual machine arms overlap by 100mm per arm

MPEP  from 12 microns

MPEE  from 12 + 15L/1000 ≤ 40

Enviroment
  • Nominal Temperature 20 °C
  • Allowable Temperature Range: 18 – 22 °C
  • Temperature Gradient: 0.5° C/hour – 2° C/day – 0.5° C/meter
  • Extended Temperature Range: 16 – 26 °C
  • Operating Temperature Range: 15 – 35 °C
  • Relative Humidity 40 – 80% (non condensating)
  • Acceptable Vibrations: 30mm/ sec2 1-10Hz | 15mm/ sec2 10-20Hz | 50mm/ sec2 20-100Hz
Services
  • Air Consumption 110Nl/min
  • Power Supply Voltage 230v 50Hz or 110v 60Hz (+/- 2% single phase)
  • Maximum Power Consumption 10A 1400W
  • Minimum Air Supply 5.5 Bar -80PSI
Performance Data

All COORD3 CMM products are evaluated for accuracy using the ISO10360 standard

  • Laser Scanning Sensor
  • Disegageable drives on DCC models allowing manual operation
  • Dynamic Wireless Thermal Compensation of Machine and Part
  • Protection Bellows Covers to Y & Z axes
  • Renishaw PHS infinite position probe head
  • Cast Iron or Granite Table on Console model
Seperate Table on Runway model

Air Drier

Modular Part Fixturing Kits

CMM Touch Station

CMM Modular Enclosure

horizontal arm production cmm jupiter

Horizontal ARM CMM

Jupiter - Production Inspection CMM

The Jupiter Inspection Robot offers a high-performance shop-hardened CMM for use in direct production pace manufacturing and specifically developed for the inspection of automotive body-in-white and subassemblies.

Jupiter is a Runway configuration, available in single or dual arm configuration, and is fully encapsulated to provide thermal isolation from environmental changes and includes protection from shop-floor contamination. Jupiter is characterized by high dynamics and high accuracy. The Jupiter CMM can be installed flush with the factory floor with walkable way covers as standard.

Jupiter is unique in offering air bearings to both Y and Z axis providing a high-performance high accuracy measuring solution.  Each horizontal arm measuring volume overlaps by 100mm to allow for full cross-body measurements.

The JUPITER CMM is a proven high-performance CMM for direct use in production. It paces manufacturing and was specifically developed for automotive body-in-white and subassembly inspection applications. JUPITER is a Runway design and available in single or dual arm configurations. It is fully encapsulated to provide thermal isolation from environmental changes and includes protection from shop-floor contamination. High dynamics and superior accuracy characterize this CMM, which can be installed flush with the factory floor and is equipped with walkable way covers as standard.

Air-bearings for both the Y- and the Z-axes are the key to a high performance measuring solution. In the dual arm configuration, the measurement volumes of the two horizontal arms overlap by 100mm to allow full cross-body measurements.

JUPITER Horizontal Arm CMM is available in a range of cross-section sizes (ZY):

Single Arm: 20.16 | 25.16 | 30.16 | 20.18 | 25.18 | 30.18 

Dual Arm: 20.30 | 25.30 | 30.30 | 25.34 | 30.34

Accuracy from 12 + 15L1000 <40

  • Available a single or twin arm configuration
  • Separate granite or cast iron surface plate option
  • Steel X guideway with optimum measuring scale position for accuracy and maintenance
  • Rugged machine construction for reliable operation in manufacturing environments
  • 0.1 micron resolution measuring scales incorporating dynamic signal processing
  • Dual precision Linear Guideways on X axis
  • Rigid air bearings to Y and Z axes with wide bearing spread ratios and low air consumption
  • Z axis counter-balance safety brake
  • Walk-on X axis steel covers for optimal operator access and safety
  • Thermal encapsulation of CMM with covers to minimize impact changing environment temperatures
  • Open access to CMM measuring area from all sides
  • Specifically designed for the shop floor environment
  • Suitable for floor-flush installation
  • Maximum Positioning Speed 580mm/sec
  • Maximum Acceleration 1500mm/sec²

The Renishaw PHS continuous wrist is not locked into its driven angular position as with indexing heads; instead it is driven to the commanded position and as a probed measuring point is taken the wrist axes latch simultaneously with the axes of the CMM to provide accurate measurements. The head is protected by a built-in overtravel protection unit which signals the machine to stop in the event of a part collision.

The PHS can be supplied with probe mount change rack allowing probe extensions or adaptors to be exchanged to suit the probing task required without manual intervention. Its modular construction and simple operation enable any number of racks to be positioned on a pillar anywhere within the VMM measuring volume. The rack is passive: all locking and unlocking of adaptors and extensions is done by using the CMM motion.

X axis strokes: 5000 | 6000 | 8000

Y axis strokes*: 1400 | 1600 | 1800

Z axis strokes: 2000 | 2500 | 3000)

*Per arm measuring stroke. Dual machine arms overlap by 100mm

MPEP  from 14 microns

MPEE  from 12 + 22L/1000 ≤ 50

Enviroment
  • Nominal Temperature 20 °C
  • Allowable Temperature Range: 18 – 22 °C (Extended Range 16 – 26 °C)
  • Temperature Gradient: 0.5° C/hour – 2° C/day – 0.5° C/meter (Extended Range 5° C/day – 1.0° C/meter)
  • Operating Temperature Range: 15 – 35 °C
  • Relative Humidity 40 – 80% (non condensing)
  • Acceptable Vibrations: 30mm/ sec2 1-10Hz | 15mm/ sec² 10-20Hz | 50mm/ sec² 20-100Hz
Services
  • Minimum Air Supply 5.5 Bar -80PSI
  • Air Consumption 150Nl/min)
  • Power Supply Voltage 230v 50Hz or 110v 60Hz (+/- 2% single phase)
  • Maximum Power Consumption 10A 1400W
Performance Data

All COORD3 CMM products are evaluated for accuracy using the ISO10360 standard.

  • Laser Scanning Sensor
  • Dynamic Wireless Thermal Compensation of Machine and Part
  • Protection Bellows Covers to Y & Z axes
  • Renishaw PHS infinite position probe head
  • Separate Component Support Table
  • Automatic Part Loading systems
  • Air Drier
  • Modular Part Fixturing Kits
  • CMM Touch Station